This is our most popular model. The powerful 3/4 horse motor produces a uniform particle size in a variety of materials. Designed to be adaptable to your lab sample grinding requirements with quality interchangeable components and attachments. Sample consistency produced by the Belt Drive Model is compatible with NIR sample testing.
Buehler’s EcoMet 3000 is a variable speed grinder-polisher with an 8 (203mm) low profile aluminum platen and a Buehler universal mount. Platen speed is variable from 10 to 500 rpm. Percent Load display shows the amount of load on the motor. A built-in center mount facilitates use of the AutoMet Power Head with either wheel. The instrument is designed for sample preparation applications which require two grinding-polishing stations.
Applications
•Surface finishes can be achieved down to a mirror finish depending upon material and technique.
LM 3100 is a hammer mill with a robust metal construction built in and insulated for low noise level. It is suitable for grinding for Falling Number, Glutomatic, Kjeldahl and NIR analysis. It has a cyclone sample outlet for convenient sample collection, which also makes the mill virtually self-cleaning between grindings.
LM 3100 is a hammer mill with a robust metal construction built in and insulated for low noise level. It is suitable for grinding for Falling Number, Glutomatic, Kjeldahl and NIR analysis. It has a cyclone sample outlet for convenient sample collection, which also makes the mill virtually self-cleaning between grindings.
The Laboratory Mill 3610 is a larger disc mill also approved for oven and NIR moisture tests. It is also well suited for grinding large size material such as feed raw material, pellets etc. The LM 3610 can grind larger samples than the LM 3310.
Lab Mill 3610 is a larger disc mill also approved for oven and NIR moisture tests. It is also well suited for grinding large size material such as feed raw material, pellets etc. The LM 3610 can grind larger samples than the LM 3310.
The MetPrep 3™ grinding and polishing machines, with the PH™ line of power heads, are powerful systems for semiautomatic operation, ideal for low to high volume sample preparation requirements. A wide variety of combinations provides ideal solutions that accommodate any lab, application or material.
The Quadrumat® Junior is a precision laboratory mill that yields flour and bran from grain samples with extraordinary high capacity. The multi-step grinding process allows to produce flours which are almost equal to commercially milled flours in ash content, yield, and baking quality...the minimum sample requirement is 20 grams, however the instrument can output 500 grams in approximately five minutes with a flour yield of 65-70%.
RMS Roller Grinder system is a 2-pair (arranged one pair on top of the other), 9”x24” roller grinder (fancy roller mill). The drive units for the rollers are paired front and back and are individually controlled using Variable Frequency Drives (allows for infinite speed differential between the roller pairs.
Shearing Action: The four adjustable hard tool steel knives are bolted to a removable rotor. These knives work against six stationary knives bolted into the frame. The shearing action tends to avoid changes in the sample due to temperature increase, moisture loss, liquefaction, contamination, etc. caused by crushing and abrasion methods. The clearance of opposing knives is precisely adjusted for shearing clearance. Each stationary knife is independently adjustable. The fan effect of knives provides increased throughput and quick clearing of the chamber.
