Milling

Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

This is a machine that produces pelleted feed. In very simple terms we take mixed feed, apply steam to increase the temperature and moisture content of the feed and then press it through holes in a rotating ring-die.

University Tag Number: 
042101
Availability: 
Contact Custodian for availability
  • Kim Koch
Location
Northern Crops Institute
Room Number: 
FDML
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Model PM810 Pellet Mill

• 8" diameter x 1.5" thick machined die plate

• 10 HP grease-packed gear motor

• Stainless steel upper housing

• 4" diameter hardened rollers

• Capacity - woody material up to 200lbs. per hour

• Capacity - grassy/crop residue material 400 lbs. per hour*

• Capacity varies upon material preparation

University Tag Number: 
185285
Availability: 
Contact Custodian for availability
  • Igathinathane Cannayen
Location
Off Campus
Room Number: 
NGPRL Mnd
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The Electrically Heated Prep-Mill® is a universal, heavy-duty machine designed for small-scale milling of elastomeric and thermoplastic materials. The Two-Roll Mill combines the features of precision construction, reliability and serviceability into a mobile and compact milling station, ensuring uniform batch-to-batch mixing characteristics.

University Tag Number: 
187862
Availability: 
Contact Custodian for availability
  • James Bahr
Location
Research I Addition
Room Number: 
1238
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Kinematica™ Polymix™ PX-MFC 90 D Model Polymix Lab Mill Drive Unit. 

Product Type : Polymix Lab Mill Drive Unit

Voltage: 115V

Dimension:  10.5”L x 13.8”W x 20”H

Height:  19”

Length:  10”

University Tag Number: 
196168
Availability: 
Contact Custodian for availability
  • Clifford Hall
Location
Harris Hall
Room Number: 
212
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The compact, yet ruggedly constructed W Series Laboratory-Scale Hammer Mill offers tremendous flexibility while producing results comparable to high production models. A robust, portable gravity discharge hammer mill, the W Series is scalable and ideal for batch, small production or pilot projects. It is highly versatile and able to reduce a variety of materials to a fine granular or powder consistency.

University Tag Number: 
192283
Availability: 
Contact Custodian for availability
  • Igathinathane Cannayen
Location
Off-Campus
Room Number: 
Mandan
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The W Series Laboratory Scale Hammer Mill is a gravity discharge hammer mill that produces results scalable to their high production counterparts. The W Series is ideal for processing small hogged wood scrap, wood chips and planer shavings.

Typical Applications

•Agricultural Products

•Animal Feed

•Ethanol Production

•Herbs and Spices

•Light Wood Chips

•Meat and Bone Meal

•Miscellaneous Grains

•Wood Chips

•Sawdust

University Tag Number: 
192284
Availability: 
Contact Custodian for availability
  • Igathinathane Cannayen
Location
Off-Campus
Room Number: 
Mandan
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

For applications that require big capacity and high tolerances, this full featured 10" x 54" Vertical Milling Machine is ideally suited. The most discerning machinist will appreciate its electronic variable speed, fully articulated head/ram assembly, table and knee power feeds, chromed quill, high quality spindle bearings, double bronzed lead screws, Allen-Bradley® electronics and swing arm mounted controls. The 5 HP 3-phase motor runs on single-phase 220 volt power with a Yaskawa inverter to provide variable spindle speeds. 

University Tag Number: 
193657
Availability: 
Contact Custodian for availability
  • Charles Choate
Location
Dolve Hall
Room Number: 
137
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Rotor Beater Mill SR300

•Scale up model from the Ultra Centrifugal Mill ZM200

•Grind to a possible fineness of 80 microns and below accomplished by impact and shearing principles

•Narrow particle size distribution

•Ideal for free flowing dry soft to medium hard materials

•Available screens from 0.08mm up to 10.0mm

•Stainless Steel Grinding Chamber, Hopper, Feed, and Outlet

•Stainless Steel screens, frame, and rotors available

•Distance rotor available for reduction in heat

•Mill is supplied with base frame

University Tag Number: 
185899
Availability: 
Contact Custodian for availability
  • Rob Sailer
Location
Off-Campus`
Room Number: 
SpaceAge
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The Thomas Wiley® Mini-Mill features a polished chamber, 40 mm diameter x 22 mm deep; two stationary blades; and a rotor with four cutting edges that revolve at high speed to produce a shearing action which minimizes loss of moisture from heat. This cutting mill produces a 20-gram, 40-mesh sample of dried plant stem tissue in 15 to 20 minutes; a similar sample of extracted leaf tissue in 7 to 10 minutes; or 13 mm pieces of soybean stems in 5 to 7 minutes. Dried samples are generally used, but tobacco with 12% moisture has been milled satisfactorily.

University Tag Number: 
183036
Availability: 
Contact Custodian for availability
  • Blaine Schatz
Location
Carrington REC
Room Number: 
Argronomy Lab
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The Thomas Model 4 Wiley® Mill is ideal for the sample preparation of solid biofuels according to EN 14780.

•Official Methods of Analysis AOAC 922

•Moving parts are totally enclosed

•7 3/4” diameter milling chamber - 141 cu. in.

•2 1/4” diameter sample input

•50 to 1,000 gram sample volume

•Single speed - 800 rpm at 60 Hz or 667 rpm at 50 Hz

•All steel construction

University Tag Number: 
173873
Availability: 
Contact Custodian for availability
  • Marsha Kapphahn
Location
Hultz Hall
Room Number: 
145A