Other Cutting

Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

The BPM Series Pelletizer was developed and engineered for the laboratory and small production runs. Based on the proven design of our larger production machines, this lab pelletizer has many of the features found only in production units. From glass filled engineered resins to soft rubber like polymers, these work horses are tough enough to get the job done.

University Tag Number: 
172633
Availability: 
Contact Custodian for availability
  • Rob Sailer
Location
Dolve Hall
Room Number: 
128
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

The Champion 305 TC 30.5" Programmable Paper Cutter is featured with an intuitive 10.5" color touch-screen TC Controller that allows variable mode data entry, automatic fraction to decimal calculation and unlimited program storage capacity. Its light safety curtains, enclosed rear table, two-hand timed non-repeat cut buttons, and a knife safety latch contribute to our UL and CE certification. The clamp mark waste is reduced or eliminated with programmable electronic clamp pressure control per cut.

University Tag Number: 
188847
Availability: 
Contact Custodian for availability
  • Christopher Anderson
Location
Morrill Hall
Room Number: 
12
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

Pasta extruders equipped with double basin suitable for continuous production of fresh pasta of the short, long and sheet kind, which can be obtained with any types of flour. These pasta machines are particularly suitable for pasta shops and large communities.
Entirely built in stainless steel they are to the international, hygienical and safety rules.

University Tag Number: 
196141
Availability: 
Contact Custodian for availability
  • Frank Manthey
Location
Harris Hall
Room Number: 
129A
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

DEMARCO single screw extruder
• 190 pounds (85 kilograms) / hour production
• Makes long or short cut pasta
• Continuous production

University Tag Number: 
132341
Availability: 
Contact Custodian for availability
  • Rilie Morgan
Location
Northern Crops Institute
Room Number: 
144A
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

Laser glass processing is increasingly being utilized as various consumer electronics, such as television, mobile/smart phones, and GPS devices gain in popularity. Motivating factors include reduced cost through yield and device enhancement through laser-enabled processes.

University Tag Number: 
178542
Availability: 
Contact Custodian for availability
  • Frederik Haring
Location
Research II
Room Number: 
154
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

Dreis & Krump offers hydraulic shears with cutting lengths of 5, 8, and 10 feet. The swing beam hydraulic shear with adjustable stroke stoke length and simple blade gap adjustment will make your shearing operation a snap.

HCHC blades, compact hydraulic unit and inch/single operating modes are standard equipment. Asquaring arm with inlaid scale, tee slot and flip stop make front gauging a snap. The power back gauge with LED readout and GO TO Positioning offers value at an affordable price.

University Tag Number: 
199212
Availability: 
Contact Custodian for availability
  • Charles Choate
Location
Dolve Hall
Room Number: 
137
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

Optec MicroMaster Excimer Laser
This machine operates using an ultraviolet laser to vaporize a variety of materials. This machine includes many features and masks which aid in the creation of nearly any shape and size ablation.
Applications
•Removing lamination from vias
•Creating three dimensional structures
•Create laser markings on wafers and other substrates

University Tag Number: 
173147
Availability: 
Contact Custodian for availability
  • Greg Strommen
Location
Research II
Room Number: 
112
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

High precision arc segment holder with ranges from 0-45° or +/- 22.5° with self-locking controls
Smooth, precise knife stage micrometer drives with marked increments of 0.5 and 5.0 microns
Digital approach with user selectable increments, for novice and advanced users alike.
Bright, wide angle stereomicroscope with 3X zoom, range from 10.08X to 64X with 16X eyepieces

University Tag Number: 
173263
Availability: 
Contact Custodian for availability
  • Scott Payne
Location
USDA NCSL Lab
Room Number: 
112
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

Pasta sheet machine for making ready cut ravioli

Combination group which kneads, layers and cuts the sheet of pasta into various shapes as noodles, pappardelle, tagliolini, lasagne, etc. and produces already cutted double sheet ravioli stuffed with meat, cheese and vegetables into various shapes as quare, round, halfmoon, triangle, fish, mushroom, etc.

University Tag Number: 
169143
Availability: 
Contact Custodian for availability
  • Rilie Morgan
Location
Northern Crops Institute
Room Number: 
144A
Inventory Classification
  • Infrastructure
  • Workshop
  • Other Cutting

The Thermal Twin process offers new opportunities in extruded foods. For example, products that are high in corn or rice content can be processed without the stickiness previously encountered in other extruder designs. Starches may be fully cooked without damage to functional and organoleptic properties.
In pet food applications, the ability to use high levels of thermal energy also provides the potential to produce specialty foods and treats with up to 90 percent fresh meat (as a percent of the dry recipe) and up to 40 percent moisture without changing the extruder configuration.

University Tag Number: 
135846
Availability: 
Contact Custodian for availability
  • Mark Weber
Location
Northern Crops Institute
Room Number: 
243