Workshop

Inventory Classification
  • Infrastructure
  • Workshop
  • Sawing

Buehler’s IsoMet 4000 Linear Precision Saw is designed for cutting various types of materials with minimal sample deformation. The IsoMet 4000 provides users with a precision sectioning tool capable of cutting virtually any material, including brittle and ductile metals, ceramics, composites, cements, laminates, plastics, electronic components and biomaterials. Additionally, a built-in coolant pump minimizes sample deformation by reducing heat build-up.

University Tag Number: 
171789
Availability: 
Contact Custodian for availability
  • Aaron Reinholz
Location
Research II
Room Number: 
112
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Vertical Milling Machine, Variable Speed R8, Table Size (In.) 12 x 54, Longitudinal Travel (In.) 33.88, Cross Travel (In.) 15-21/64, Knee Travel (In.) 19-1/4, Ram Travel (In.) 25, Ram Swivel (Deg.) 90, R-8 Spindle Taper, Spindle to Table (In.) 23, Spindle Speed (RPM) 80 to 3800, Quill Travel (In.) 5, Quill Dia. (In.) 3-3/8, Number of T-Slots 3, T-Slot Size (In.) 3-5/8 In., Feed Rate for Power Down Feed (In.) 0.0015, 0.003, 0.006, Head Angle Front/Back (Deg.) 45, Head Angle (Deg.) 90

University Tag Number: 
196192
Availability: 
Contact Custodian for availability
  • James Moos
Location
Ag & Biosystems Engr
Room Number: 
124
Inventory Classification
  • Infrastructure
  • Workshop
  • Grinding

LM 3100 is a hammer mill with a robust metal construction built in and insulated for low noise level. It is suitable for grinding for Falling Number, Glutomatic, Kjeldahl and NIR analysis. It has a cyclone sample outlet for convenient sample collection, which also makes the mill virtually self-cleaning between grindings.

University Tag Number: 
181839
Availability: 
Contact Custodian for availability
  • Frank Manthey
Location
Harris Hall
Room Number: 
38
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The Lab Mill 3100 is a hammer type cyclone mill, built into a soundproof casing. An airflow feeder regulates feeding of a sample into a metallic grinding chamber. A hardened steel hammer rotates at high speed, forcing the sample through a stainless-steel sieve. The fine, homogeneous sample is separated from the air in a cyclone and collected in a quick release stainless steel container. The cyclone principle makes the mill self-cleaning and thus cleaning between samples is not normally required. Standard sieve (0.8mm) is used for Falling Number, Glutomatic/Gluten Index and NIR-analyses.

University Tag Number: 
164874
Availability: 
Contact Custodian for availability
  • Natsuki Fujiwara
Location
Northern Crops Institute
Room Number: 
242
Inventory Classification
  • Infrastructure
  • Workshop
  • Grinding

LM 3100 is a hammer mill with a robust metal construction built in and insulated for low noise level. It is suitable for grinding for Falling Number, Glutomatic, Kjeldahl and NIR analysis. It has a cyclone sample outlet for convenient sample collection, which also makes the mill virtually self-cleaning between grindings.

University Tag Number: 
202487
Availability: 
Contact Custodian for availability
  • Senay Simsek
Location
Harris Hall
Room Number: 
208
Inventory Classification
  • Infrastructure
  • Workshop
  • Grinding

The Laboratory Mill 3610 is a larger disc mill also approved for oven and NIR moisture tests. It is also well suited for grinding large size material such as feed raw material, pellets etc. The LM 3610 can grind larger samples than the LM 3310.

University Tag Number: 
188246
Availability: 
Contact Custodian for availability
  • Frank Manthey
Location
Harris Hall
Room Number: 
105
Inventory Classification
  • Infrastructure
  • Workshop
  • Grinding

Lab Mill 3610 is a larger disc mill also approved for oven and NIR moisture tests. It is also well suited for grinding large size material such as feed raw material, pellets etc. The LM 3610 can grind larger samples than the LM 3310.

University Tag Number: 
204052
Availability: 
Contact Custodian for availability
  • Senay Simsek
Location
Loftsgard Hall
Room Number: 
346
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Type MLU-202 Laboratory Roller Mill, Buhler Inc., Minneapolis, MN

University Tag Number: 
177088
Availability: 
Contact Custodian for availability
  • Senay Simsek
Location
Harris Hall
Room Number: 
25
Inventory Classification
  • Infrastructure
  • Workshop
  • Solder/Desolder

For the removal and placement of Surface-Mount-Technology (SMT) components.

University Tag Number: 
167702
Availability: 
Unknown
  • Aaron Reinholz
Location
Research II
Room Number: 
120
Inventory Classification
  • Infrastructure
  • Workshop
  • Grinding

The MetPrep 3™ grinding and polishing machines, with the PH™ line of power heads, are powerful systems for semiautomatic operation, ideal for low to high volume sample preparation requirements. A wide variety of combinations provides ideal solutions that accommodate any lab, application or material.

University Tag Number: 
179267
Availability: 
Contact Custodian for availability
  • Rob Sailer
Location
Dolve Hall
Room Number: 
136