Workshop

Rotor Beater Mill SR300

•Scale up model from the Ultra Centrifugal Mill ZM200

•Grind to a possible fineness of 80 microns and below accomplished by impact and shearing principles

•Narrow particle size distribution

•Ideal for free flowing dry soft to medium hard materials

•Available screens from 0.08mm up to 10.0mm

•Stainless Steel Grinding Chamber, Hopper, Feed, and Outlet

•Stainless Steel screens, frame, and rotors available

•Distance rotor available for reduction in heat

•Mill is supplied with base frame

Shearing Action: The four adjustable hard tool steel knives are bolted to a removable rotor. These knives work against six stationary knives bolted into the frame. The shearing action tends to avoid changes in the sample due to temperature increase, moisture loss, liquefaction, contamination, etc. caused by crushing and abrasion methods. The clearance of opposing knives is precisely adjusted for shearing clearance. Each stationary knife is independently adjustable. The fan effect of knives provides increased throughput and quick clearing of the chamber.

Vacuum stuffer with twist linker is a Frey (Konti C120), it has a capacity for around 100 lbs. and can stuff that 100 in a matter of 20 minutes.
* Vacuum Stuffer Frey Konti E 120
* Vacuum filling machine for filling, portioning, linking
* Bowel holding device
* Loading device
* LCD 2 monitor control
* Body all stainless steel

The Thomas Wiley® Mini-Mill features a polished chamber, 40 mm diameter x 22 mm deep; two stationary blades; and a rotor with four cutting edges that revolve at high speed to produce a shearing action which minimizes loss of moisture from heat. This cutting mill produces a 20-gram, 40-mesh sample of dried plant stem tissue in 15 to 20 minutes; a similar sample of extracted leaf tissue in 7 to 10 minutes; or 13 mm pieces of soybean stems in 5 to 7 minutes. Dried samples are generally used, but tobacco with 12% moisture has been milled satisfactorily.