The dynamometer consists of four three-component force sensors fitted under high preload between a baseplate and a top plate. Each sensor contains three pairs of quartz plates, one sensitive to pressure in the z direction and the other two responding to shear in the x and y directions respectively. The force components are measured practically without displacement. The outputs of the four built-in force sensors are connected inside the dynamometer in a way to allow multicomponent measurements of forces and moments to be performed.
Double upper bearer for third point test and center. Total height: 370 mm when adjusted for 150 mm beams and 320 mm for 100 mm beams. The 370 mm vertical daylight can easily obtained removing the lower platen of the compression tester. ◾ Max vertical daylight: 160mm (total height:370mm)
◾ Min vertical daylight: 110mm (total height:320mm)
Table Top Load Frames are compact and affordable testing systems with both static and dynamic loading capabilities. They can be utilized for a variety of tests, including tension, compression, bend, and fatigue studies. Low friction hydrostatic bearings allow for accuracy at low speeds.
Table Top Load Frame Features: