Network Analyzer

Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

The E5071C network analyzer offers the highest RF performance and fastest speed in its class, with a wide frequency range and versatile functions. The E5071C is the ideal solution for manufacturing and R&D engineers evaluating RF components and circuits for frequency range up to 20 GHz.

Features:

•Wide dynamic range: > 123 dB dynamic range at test port (typical)

•Fast measurement speed: 41 ms @ full 2-port cal, 1601 points

•Low trace noise: 0.004 dB rms @ 70 kHz IFBW

•Integrated S-parameter test set

•Port options: 2-port and 4-port

University Tag Number: 
176925
Availability: 
Contact Custodian for availability
  • Jeffrey Erickson
Location
Electrical Engineering
Room Number: 
205
Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

Add Copper and Fiber certification to the Versiv family of troubleshooting kits. Test Cat 6A cabling with the Cat 6A modules and remote for dual ended certification and test end to end fiber loss length with the quad length fiber modules.

University Tag Number: 
196999
Availability: 
Contact Custodian for availability
  • Janet Stringer
Location
Quentin Burdick Building
Room Number: 
136
Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

Key Features and Functions

•9 kHz to 4.5/6.5/8.5/14/20 GHz

•2- or 4-port, 50 ohm, S-parameter test set.

•Improve accuracy, yield and margins with wide dynamic range 130 dB, fast measurement speed 8 ms  and excellent temperature stability 0.005 dB/°C.

•Obtain design confidence through complete characterization of high-speed serial interconnects with enhanced time domain analysis option.

University Tag Number: 
197076
Availability: 
Contact Custodian for availability
  • Benjamin Braaten
Location
Electrical and Computer Engineering
Room Number: 
113
Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

Agilent N5242A PNA-X Vector Network Analyzer, Frequency Range: 10MHz – 26.5GHz The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.

University Tag Number: 
180770
Availability: 
Contact Custodian for availability
  • Aaron Reinholz
Location
Research II
Room Number: 
112
Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

The E4 is the latest generation system from Q-Sense and includes 4 sensors that can be used in any serial or parallel configuration to suit a variety of experimental designs. New software and electronics allow measurement data from all four sensors to be acquired within a second with preserved sensitivity. 4-sensor chamber allows higher throughput and makes reproducibility easier. Flow measurements. Chamber specifically designed for controlled flow measurements. Electrochemistry cell (optional) enables combined electrochemistry QCM-D measurements. Easy cleaning.

University Tag Number: 
173229
Availability: 
Contact Custodian for availability
  • James Bahr
Location
Research I Addition
Room Number: 
1226
Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

The Agilent B1500A Semiconductor Device Analyzer is the only parameter analyzer with the versatility to provide a wide range of device characterization capabilities, uncompromised measurement reliability, and effi cient and repeatable measurement. It supports all state-of-the-art measurements (IV, CV, and fast pulsed IV), giving it the ability to cover the electrical characterization and evaluation of devices, materials, semiconductors, active/passive components, or virtually any other type of electronic device.

University Tag Number: 
173266
Availability: 
Contact Custodian for availability
  • Aaron Reinholz
Location
Research II
Room Number: 
112
Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

The OptiView® XG is the first tablet specifically designed for the network engineer. It automates root-cause analysis of wired and wireless network and application problems allowing the user to spend less time on troubleshooting and more time on other initiatives. It is designed to support the deployment and troubleshooting of new technologies, including unified communications, virtualization, wireless and 10 Gbps Ethernet. The result is that new initiatives get up and running faster and networks stay productive even in these days of smaller teams.

Core capabilities:

University Tag Number: 
192760
Availability: 
Contact Custodian for availability
  • Janet Stringer
Location
Quintin Burdick Building
Room Number: 
136
Inventory Classification
  • Sample Measurement and Analysis
  • Electronic
  • Network Analyzer

HP Agilent 8712B 1.3 GHz RF Vector Network Analyzer Frequency • Range: 300 kHz to 1.3 GHz • Resolution: 1 Hz • Stability: ±5 ppm 0° C to 55° C typical • Accuracy: • 1) ±5 ppm @ 25° C ±5° C • 2) <1 Hz at 10% change in line voltage • Harmonics: • <-20 dBc, <1MHz • <-30 dBc, >1MHz • Output Power: • Resolution: 0.01 dB • Level Accuracy: ±1.0 dB

University Tag Number: 
152850
Availability: 
Contact Custodian for availability
  • David Rogers
Location
Electrical Engineering
Room Number: 
225