The rolling thin film oven is used to measure the effect of heat and air on a moving film of semi-solid asphaltic material. The results of this treatment are determined from measurements of the asphalt properties before and after the test.
Ideal for monitoring flows in canals, culverts, pipes, and natural streams, the SonTek-IQ starts with a custom flow algorithm derived from hundreds of field measurements. Four velocity beams profile water velocity in 3-D - both vertically and horizontally - ensuring complete coverage of the velocity field. The built-in pressure sensor and vertical acoustic beam work in tandem to measure water level. Simply input the channel geometry using the intuitive SonTek-IQ software and you are outputting flow data in minutes.
The Nicolet 8700 FT-IR breaks through time-scale, sensitivity, and sampling barriers with a suite of advanced features for research spectroscopy applications. Building on all the capabilities of the Nicolet 6700, the Nicolet 8700 offers a full range of step-scan operation modes, dual-channel internal digitizers, extended spectral range, and flexible inputs and status signals for interfacing the Nicolet 8700 to external experiments. Fully equipped for the research laboratory, the Nicolet 8700 is ready to tackle the most challenging experiments.
1. Delayed Start timer: may be set to start of the autoclave up to 99 hours later. This allows users to preset cycles the night before to complete as work begins in the morning
2. Liquid Sterilizing Course: Exhaust valve is disabled for this course to prevent the unintentional boiling of liquids at the end of the course.
3. Sterilizing Course: Autoclave will automatically exhaust the steam at the end of the sterilization cycle at the pre-set rate.
The Type-36 is one of the smallest and fastest core alignment fusion splicers available today. It s a portable, fully automatic, self-contained instrument for creating low-loss optical fiber splices in both field and factory environments. Sumitomo s innovative dual microscope fiber observation system eliminates the need for mirrors, providing faster operation and reduced damage potential. It is designed to work with a variety of fiber types including single-mode, multimode, dispersion shifted, and other specialty fiber.
Table Top Load Frames are compact and affordable testing systems with both static and dynamic loading capabilities. They can be utilized for a variety of tests, including tension, compression, bend, and fatigue studies. Low friction hydrostatic bearings allow for accuracy at low speeds.
Table Top Load Frame Features:
Topcon GTS-213 7" Total Station Electronic Survey Surveying GTS-210 series.
All in one... With an internal memory and powerful software for surveying and lay-out applications, the GTS-210 series is a reliable tool for every surveying task. With on-board data collection capability, simple operations can be achieved by selecting the necessary functions, such as data collection and layout from the main menu.
•2,400 points can be stored in the internal memory
The triaxial cell is constructed of stainless steel for soil sampling. The standard unit features a see-through Plexiglas external cell wall. The advantages of the external cell wall are that after the specimen is completely ready for a test, the cell wall is lowered over the cell and fastened into place with a minimum of disturbance to the test sample. All the standard triaxial cells can accommodate smaller diameter specimens using optional platens. These triaxial cells accept specimens with a length of 2 to 2.5 times the diameter. Max specimen diameter is 150mm.
