Buehler’s SimpliMet 1000 automatic mounting press is used to mount specimens with thermosetting resins, including Phenolics, EpoMet, ProbeMet, KonductoMet I, and Diallyl Phthalate. Easy to change molds are offered in a full range of sample sizes from 1 to 2 (25 mm–50 mm).
PV Measurements' solar cell QE systems can measure the spectral response of a wide variety of photoAll QEX7 solar cell QE systems include a xenon light source, monochromator, filters, and reflective optics to provide monochromatic light to a photovoltaic device while a broadband bias light illuminates the test device to simulate end-use conditions. A computer interfaces with the monochromator, signal conditioning equipment, and digital signal processing equipment; interprets signals; maintains calibration information; saves test data; and produces test reports.
Used to develop photo resist on wafers and substrates up to 230 mm. Adjustable speed from 50 to 8,000 rpm with ±10 rpm resolution. Dual N2 aspirated atomizing nozzles. Constant 2-3 psi nozzle pressure regardless of fluid level.
A GeneVac EZ-2TM solvent evaporation system evaporates solvent and other low molecular weight compounds from arrays of samples. It is used for sample work-up and to evaporate volatiles from polymer and coating samples for solids determination.
Agilent E4407B Spectrum Analyzer, Frequency Range: 9kHz - 26.5 GHz. The Agilent ESA-E Series (E4407B) is our mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
The Agilent ESA-E Series (E4407B) is our mid-performance spectrum analyzer solution for the future. The series sets the performance standards in measurement speed, dynamic range, accuracy, and resolving power for similarly priced products. Its flexible platform design enables R&D, manufacturing, and field service engineers to customize the product to meet specific testing needs and to upgrade the product with new features when required.
Used to etch away unwanted metals from substrates or wafers. Has a 6in x 7in workpiece capacity. The workpiece rotates and moves up and down in the spray process chamber. The station consists of PVC construction, titanium hardware and PVC plumbing.
Used for wet developing. It helps develop the patterns that have been masked onto the substrates.
Used for wet stripping. Polypropylene construction for use as a resist stripping machine.