Tabletop 312R Series electromechanical universal test machines are popular test machines and are configured by an applications engineer. Several different controllers and test software options make it possible to perform a wide range of tensile, compression, shear, flexure, peel, adhesion, friction, tear, cyclic, and flexural bend tests. The 312R Series machine features dual column frames with load ratings up to 25 kn (5500 lbs) and speeds up to 20 ipm (500mm/m).
The ARES-G2 is the most advanced rheometer for research and material development. It is the only rheometer with dual-head, or separate motor and transducer, technology for the PUREST rheological measurements. No other rheometer is capable of measuring stress independently of the applied shear deformation. It is recognized by the rheological community as the industry standard to which all other measurements are compared for accuracy.
The new Discovery Series Hybrid Rheometer (DHR) represents the latest technological breakthroughs from the world leader in rheology. It combines a patented advanced drag cup motor, a second generation magnetic bearing, force rebalance transducer (FRT), and the new patent-pending True Position Sensor (TPS) in a single-head Hybrid rheometer. The DHR has unprecedented performance specification and delivers unsurpassed direct strain control, direct stress control, and normal force measurement accuracy.
The dynamometer consists of four three-component force sensors fitted under high preload between a baseplate and a top plate. Each sensor contains three pairs of quartz plates, one sensitive to pressure in the z direction and the other two responding to shear in the x and y directions respectively. The force components are measured practically without displacement. The outputs of the four built-in force sensors are connected inside the dynamometer in a way to allow multicomponent measurements of forces and moments to be performed.
The Dynatup 9250 an instrumented impact testing machine that tests impact properties of polymers, metals, composites and full components. Testing equipment designed to evaluate mechanical properties of materials and components, announces the Dynatup 9250, an instrumented impact testing machine that tests impact properties of polymers, metals, composites and full components. It is ideally suited for the aerospace, automotive, biomedical, and packaging markets.
Double upper bearer for third point test and center. Total height: 370 mm when adjusted for 150 mm beams and 320 mm for 100 mm beams. The 370 mm vertical daylight can easily obtained removing the lower platen of the compression tester. ◾ Max vertical daylight: 160mm (total height:370mm)
◾ Min vertical daylight: 110mm (total height:320mm)
5940 Single Column Tabletop Testing Systems are universal, static testing systems that perform tensile and compression testing; and also perform shear, flexure, peel, tear, cyclic, and bend tests. The 5900 Series are engineered for precision, built for durability, and offer the flexibility for changing requirements.They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator.
MTI 100K Electromechanical Universal Testing Machine Systems are offered in ten standard force capacities ranging from 1,000 pounds to 100,000 pounds (5 kN to 450 kN) force. All systems are fully computer controlled, and include a state-of-the-art Windows 7 based Pentium computer data-acquisition and control system with full features and capability including data-base analysis and networking. All testing, such as tensile testing, can be controlled based upon Displacement, Load, Stress or Strain.