The StarFire 3000 receiver works seamlessly with all accuracy levels (EGNOS, SF1, SF2 and RTK) and all John Deere guidance systems – from the manual steering support (Parallel Tracking) to integrated automatic steering (AutoTrac).
The full-color display gives full monitoring and control over all their solutions you use in your John Deere tractor, baler, combine or sprayer. It’s easy to understand and use and is packed with all the power and features you need for years of high-end productivity.
3D sonic anemometer is ideally suited to the measurement of air turbulence around bridges, buildings, wind turbine sites, building ventilation control systems, meteorological and flux measurement sites.
The energy balance Bowen ratio (EBBR) system produces 30-minute estimates of the vertical fluxes of sensible and latent heat at the local surface. Flux estimates are calculated from observations of net radiation, soil surface heat flux, and the vertical gradients of temperature and relative humidity (RH). Meteorological data collected by the EBBR are used to calculate bulk aerodynamic fluxes, which are used in the Bulk Aerodynamic Technique (BA) EBBR value-added product (VAP) to replace sunrise and sunset spikes in the flux data.
The CSAT3 has a 10 cm vertical measurement path and operates in a pulsed acoustic mode. The three orthogonal wind components (ux, uy, uz) and the speed of sound (c) are measured and output at a maximum rate of 60 Hz. Analog outputs and two types of digital outputs are provided.
Measurements can be triggered from from the CSAT3’s internal clock, the PC-generated RS-232 command, or the datalogger’s SDM command. The SDM protocol supports a group trigger for synchronizing multiple CSAT3s.
The EM38-MK2 provides measurement of both the quad-phase (conductivity) and in-phase (magnetic susceptibility) components within two distinct depth ranges, all simultaneously, without any requirement for soil-to-instrument contact. With a maximum effective depth of exploration of 1.5 m, applications in agriculture, archaeology and general soil sciences are common.
The H2 Classic GrainGage allows you to collect field data more efficiently than ever. First, its slope and motion sensors work to compensate for machine motion and vibration, whether weighing on-the-go or while stopped. Second, with its new design, the H2 Classic now collects test weight, moisture, and plot weight data simultaneously, letting you move to the next plot much faster—up to 240 plots per hour.
Haybuster puts 40 years of hay and feed processing experience into their Cutter-Mixer-Feeder (CMFs). Their engineers, with farm and cattle backgrounds designed the CMF models with input from dairy and beef growers throughout North America. The CMF's are built heavier and stronger for long service life. •425 cu ft mixing capacity, 525 cu ft with 12" extension
•13,500 lbs tare weight capacity