3D sonic anemometer is ideally suited to the measurement of air turbulence around bridges, buildings, wind turbine sites, building ventilation control systems, meteorological and flux measurement sites.
The Agilent 1200 Series evaporative light scattering detector (ELSD) is a powerful tool for sensitive detection of any compound that is less volatile than the mobile phase. It provides an essentially universal measurement under isocratic and gradient conditions independent of a compound’s absorbance, fluorescence or electro-activity. Low temperature evaporation technology enables detection of semi-volatile and thermally-sensitive compounds at low levels.
The SM301 is a versatile, high performance PbS/PbSe array spectrometer. Its active components include a TE cooler and a 256-element PbS detector element array. Operation of the unit for research applications. The system is ideal for spectroscopic applications in the 1.0 to 3.0 micron (PbS) region.
The energy balance Bowen ratio (EBBR) system produces 30-minute estimates of the vertical fluxes of sensible and latent heat at the local surface. Flux estimates are calculated from observations of net radiation, soil surface heat flux, and the vertical gradients of temperature and relative humidity (RH). Meteorological data collected by the EBBR are used to calculate bulk aerodynamic fluxes, which are used in the Bulk Aerodynamic Technique (BA) EBBR value-added product (VAP) to replace sunrise and sunset spikes in the flux data.
Eaton’s Training Services Hydraulic Training System (HTS-2) hydraulic trainer is based on many years of instructional experience. This fluid power training simulator is designed to ensure that those involved with the study of hydraulics have the most cost effective, hands-on method of presenting a practical demonstration of the principles taught within the classroom.
This ICI (Infrared Cameras Inc) 9640 C-Series(analog) thermal infrared camera is a 640 x 480 pixel high resolution thermal system. This camera will fit almost anywhere because of its tiny size (less than 2 sq in). It also has a bulkhead mount that can be used when securing it in a fixed mount position. You can choose from any number of our available ICI enclosures for any environment from our complete line which meet NEMA 4 - NEMA 9 specifications. This high quality thermal camera system also has a 14 Bit Digital Camera Link Out.
The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04. With over 3,500 oil and grease monitors in worldwide use today, InfraCal 2 analyzers, originally developed by Wilks, have become a standard for the petrochemical industry. These essential tools ensure that oil content levels are below the regulated limit in water, drill cuttings, and soil. The InfraCal 2 provides real-time results for all operators needing to monitor oil in water.
The LI-7000 CO2/ H2O Gas Analyzer is a high performance, dual cell, differential gas analyzer. It uses a dichroic beam splitter and two separate detectors to measure infrared absorption by CO2 and H2O in the same gas stream. At the heart of the LI-7000 is an innovative optical bench that can be dismantled and cleaned by the user without the need for factory recalibration.