The FM61 is a small-scale reaction turbine unit, which is designed to be used in conjunction with the FM6X service unit. A reaction turbine uses the momentum transferred from the reaction of a jet of water leaving a nozzle to generate power.
The Reference 600™ Potentiostat is A member of the electrochemical family. With the Reference 600, you can measure the impedance at 1 MHz with less than 2% error because the Reference 600 has a Rise Time of less than 250 nanoseconds. You can acquire data in DC experiments at 300 kHz, or one data point every 3.3 microseconds which translates to a scan rate in cyclic voltammetry of 1200 volts/second with a Step Height of 4 mV.
A rheometer is a laboratory device used to measure the way in which a liquid, suspension or slurry flows in response to applied forces. It is used for those fluids which cannot be defined by a single value of viscosity and therefore require more parameters to be set and measured than is the case for a viscometer. It measures the rheology of the fluid.
Transferring all the fresh property qualities of self-consolidating concrete (SCC) from the lab to the field is now much easier. The ICAR rheometer is a fully portable test device. The unit is about the size of a drill and can be operated by hand or positioned above a standard container. It is accurate in measuring a flow curve or performing a stress growth test for almost the full range of concrete workability, ranging from a 2-inch slump to SCC.
Discharge, bathymetry, and current profiling. The RiverSurveyor M9 is a river discharge measurement system without the traditional limitations. Small, portable and easy to use, the patented RiverSurveyor measures in extreme flood or drought situations within a single instrument, and without changing user settings. The results speak for themselves - the RiverSurveyor M9 has revolutionized the way discharge is measured in rivers and canals.
The rolling thin film oven is used to measure the effect of heat and air on a moving film of semi-solid asphaltic material. The results of this treatment are determined from measurements of the asphalt properties before and after the test.