Infrastructure

This class covers all equipment that is not directly used in sample or specimen production and characterization yet which forms a discrete part of the infrastructure of a laboratory (in the way that benching, fume hoods etc do not).

Inventory Classification
  • Infrastructure
  • Laboratory
  • Controlled Environment

The Innorack® IVC Mouse 3.5 is a top-of-the-line ventilated rodent housing system designed to house Innovive disposable IVC cages. The Innovive IVC mouse rack offers dual HEPA-filtered ventilation, transversal airflow, positive/negative modes of operation, and a dynamic digital controller with remote management capabilities – all while providing a high quality environment for your animals.

University Tag Number: 
202140
Availability: 
Contact Custodian for availability
  • Jagdish Singh
Location
Sudro Hall
Room Number: 
207A1C
Inventory Classification
  • Infrastructure
  • IT
  • Parallel Computing

The Ion Chef™ System* is the next generation of workflow simplification products for the Ion Proton™ and Ion PGM™ systems. The Ion Chef™ System provides automated, high-throughput template preparation and reproducible chip loading for users at any experience level. With typically less than 15 minutes of hands-on time, an intuitive touch-screen interface, and significantly higher productivity than the Ion OneTouch™ 2 System, the Ion Chef™ System makes the Ion Torrent™ sequencing workflow accessible for every lab.

University Tag Number: 
193578
Availability: 
Contact Custodian for availability
  • Robert Brueggeman
Location
Loftsgard Hall
Room Number: 
312
Inventory Classification
  • Infrastructure
  • Workshop
  • Press

Features:

Open throat punch has 66-ton capacity

24" bar shear with 4-sided blades can miter angle iron to 3" x 3" x 5/16"

Bar shear hold-down can be fixed or adjustable

Bar shear table

 Variable stroke control

 Built for forklift handling

 Magnetic starter for safety

 Electric foot control

 Manual Punch Aligner

 Slug type angle shear 5” X 5” X 1/2” or 6” X 6” X 3/8” Can miter angle iron 4” X 4” X 3/8”

University Tag Number: 
154532
Availability: 
Contact Custodian for availability
  • Kyle Radke
Location
Service Center/Pilot Center
Room Number: 
Shop
Inventory Classification
  • Infrastructure
  • Workshop
  • Sawing

The IsoMet 1000 is a precision sectioning saw is designed for cutting various types of materials with minimal deformation. Targeted for delicate parts by only using gravity fed force.

University Tag Number: 
184471
Availability: 
Contact Custodian for availability
  • Kalpana Katti
Location
USDA EMC lab 107
Inventory Classification
  • Infrastructure
  • Workshop
  • Sawing

Buehler’s IsoMet 4000 Linear Precision Saw is designed for cutting various types of materials with minimal sample deformation. The IsoMet 4000 provides users with a precision sectioning tool capable of cutting virtually any material, including brittle and ductile metals, ceramics, composites, cements, laminates, plastics, electronic components and biomaterials. Additionally, a built-in coolant pump minimizes sample deformation by reducing heat build-up.

University Tag Number: 
171789
Availability: 
Contact Custodian for availability
  • Aaron Reinholz
Location
Research II
Room Number: 
112
Inventory Classification
  • Infrastructure
  • Laboratory
  • Controlled Environment

140 Cage Allentown Vent Rack

•Overall Dimensions: 75" X 29" x (79"-92"H)

•7 X 10 Double Sided Cage Configuration

•Cage Dims: 7.5"L x 11.75"W x 5"H (JAG 75)

•Comes complete with cages, wire bar lids, tops

•Check Availability on Supply and Exhaust Blowers

•Supply and Exhaust plenums are located on the same side

University Tag Number: 
202134
Availability: 
Contact Custodian for availability
  • Steven Qian
Location
Sudro Hall
Room Number: 
207A1C
Inventory Classification
  • Infrastructure
  • Vehicles
  • Agricultural

The next generation of vertical feed mixers.

This series has been completely redesigned and now offers unibody construction which is stronger and more durable than traditional box frames. With the best selection of discharge options in the industry JAY-LOR Mixers are capable of processing large bales with minimal horsepower.

University Tag Number: 
199765
Availability: 
Unknown
  • Todd Molden
Location
Main Station Farm
Room Number: 
DairyBarn
Inventory Classification
  • Infrastructure
  • Vehicles
  • Agricultural

The StarFire 6000 is our new generation receiver, uniting leading edge receiver technology and yet again defining a new standard of ultimate accuracy and signal stability.

The StarFire 6000 works seamlessly with all accuracy levels and John Deere guidance systems. Second to none the StarFire 6000 inherited the field proven Terrain Compensation Module (TCM) to automatically compensate roll, pitch and yaw of the vehicle, while GLONASS compatibility remains in base. SF1 accuracy has further improved, being far superior to EGNOS and continues to be free of charge. 

University Tag Number: 
201822
Availability: 
Contact Custodian for availability
  • Ted Helms
Location
Plot Storage Shed
Room Number: 
NW-22
Inventory Classification
  • Infrastructure
  • Vehicles
  • Equipment

Features

Spindle assembly provides greater performance and reliability

Powerful 35.0-hp (26.1-kW) commercial grade engine delivers class-leading performance and efficiency Z970R engine

Durable 7-Iron™ PRO decks pressed from a single piece of steel

72-in. (183-cm) 7-Iron PRO deck shown

Mower rectangular leading-edge reinforcement

Dual-captured anti-scalp wheel

Mower deck step shown on 72-in. (183-cm) mower

Michelin® X® Tweel® Turf rear tire solution for ZTrak™ Mowers eliminates downtime and reduces the cost of operation

University Tag Number: 
198390
Availability: 
Contact Custodian for availability
  • Brian Otteson
Location
Agronomy Seed Farm
Room Number: 
Casselton, ND
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Vertical Milling Machine, Variable Speed R8, Table Size (In.) 12 x 54, Longitudinal Travel (In.) 33.88, Cross Travel (In.) 15-21/64, Knee Travel (In.) 19-1/4, Ram Travel (In.) 25, Ram Swivel (Deg.) 90, R-8 Spindle Taper, Spindle to Table (In.) 23, Spindle Speed (RPM) 80 to 3800, Quill Travel (In.) 5, Quill Dia. (In.) 3-3/8, Number of T-Slots 3, T-Slot Size (In.) 3-5/8 In., Feed Rate for Power Down Feed (In.) 0.0015, 0.003, 0.006, Head Angle Front/Back (Deg.) 45, Head Angle (Deg.) 90

University Tag Number: 
196192
Availability: 
Contact Custodian for availability
  • James Moos
Location
Ag & Biosystems Engr
Room Number: 
124