A robust precision multi-axis loadcell built to meet a variety of European and world Standard for crash test sensors. Accurately placed and bonded strain gauges ensure very high stability with very little crosstalk between axes. Mechanically and electrically compatible with the standards.
•HEADSTOCK: All gears are made with chromium molydenum steel and hardened & ground to its accuracy. A forced lubrication system lubricates all running gears and bearings within the headstock.
•GEAR BOX: Universal gear box offers a wide range of cutting capacity. All ranges can be reached by moving three levers and turning one rotary dial.
•SPINDLE: 1-9/16" bored spindle is made from medium carbon steel and is induction hardened & ground to its final accuracy. It also has a two-point support with both bearings being taper roller.
9" X 49" Table, 3 HP Variable Speed with Invertor (can operate 220 Single Phase or 3 Phase); Electronic Brake, Trouble Free Operation. 34" x 12" x 16" Travel.
The ARES-G2 is the most advanced rheometer for research and material development. It is the only rheometer with dual-head, or separate motor and transducer, technology for the PUREST rheological measurements. No other rheometer is capable of measuring stress independently of the applied shear deformation. It is recognized by the rheological community as the industry standard to which all other measurements are compared for accuracy.
The BPM Series Pelletizer was developed and engineered for the laboratory and small production runs. Based on the proven design of our larger production machines, this lab pelletizer has many of the features found only in production units. From glass filled engineered resins to soft rubber like polymers, these work horses are tough enough to get the job done.
The CR1000 is a widely used datalogger. It can be used in a broad range of measurement and control functions. Rugged enough for extreme conditions and reliable enough for remote environments, it is also robust enough for complex configurations. Used in applications all over the world, it will be a powerful core component for your data-acquisition system.
Differential scanning calorimetry or DSC is a thermoanalytical technique in which the difference in the amount of heat required to increase the temperature of a sample and reference is measured as a function of temperature. Both the sample and reference are maintained at nearly the same temperature throughout the experiment.
The Dynatup 9250 an instrumented impact testing machine that tests impact properties of polymers, metals, composites and full components. Testing equipment designed to evaluate mechanical properties of materials and components, announces the Dynatup 9250, an instrumented impact testing machine that tests impact properties of polymers, metals, composites and full components. It is ideally suited for the aerospace, automotive, biomedical, and packaging markets.
The ElectroForce® 3200 Series III test instruments feature a 225 N (450 N optional) maximum force. With the versatility of static to 300 Hz frequency response, the table-top configuration is adaptable to a variety of biomedical research and engineered materials test applications, including torsion testing, creep under dynamic loading and special environments (hot/cold chambers).
The FLOTEK 1440 is a research grade wind tunnel for university engineering and technology programs. Provides a full 12" x 12" (300mm square) cross section in the working area over 36" (900mm) in length. It also has a high air velocity capacity. This extra flexibility, coupled with the excellent flow patterns obtained, make the 1440 particularly suitable for research use as well as laboratory teaching.
It is a floor standing unit, with its own integral support structure. Larger test section allows larger models with more data points.
