Milling

Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Eberbach E3703 Series Variable Speed Heavy Duty Cutting Mills

The E3703 Large Benchtop Cutting Mill features a 7.75 inch diameter sealed cutting chamber with six stationary blades and a rotating cutting head with four replaceable cutting blades that revolve at high speed to produce a shearing action which minimizes heat build-up. The R6 Model includes a 6 bladed rotating cutter head instead of the standard 4. The additional blades allows for faster sample processing and throughput.

University Tag Number: 
197108
Availability: 
Contact Custodian for availability
  • Marisol Berti
Location
Widakas lab
Room Number: 
106
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

9" X 49" Table, 3 HP Variable Speed with Invertor (can operate 220 Single Phase or 3 Phase); Electronic Brake, Trouble Free Operation.   34" x 12" x 16" Travel.

University Tag Number: 
196769
Availability: 
Contact Custodian for availability
  • Rob Sailer
Location
Auxiliary Enterprise Bldg
Room Number: 
ME Workshop
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The mill is a Buhler experimental roller mill, model 202. It is specifically configured to mill durum wheat into semolina. Semolina is used to make spaghetti. Spaghetti is dried in the pasta drier

University Tag Number: 
188285
Availability: 
Contact Custodian for availability
  • Frank Manthey
Location
Harris Hall
Room Number: 
GARAGE
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Fluidizing Paddle Blenders are innovative additions to the industry's most comprehensive line of mixing equipment from American Process Systems (APS). The Fluidizing Paddle Blender offers a balance of mixing speed and efficiency with low equipment cost and consumed power. Fluidizing Paddle Blenders are designed to provide rapid high-speed mixing while also providing the finest product dispersion regardless of ingredients’ particle size distribution and bulk densities.

University Tag Number: 
189235
Availability: 
Contact Custodian for availability
  • Mark Weber
Location
Northern Crops Institute
Room Number: 
23 MILL RM
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Toolroom Mill; 40" x 16" x 16" (1016 x 406 x 406 mm), 40 taper, 7.5 hp (5.6 kW) vector drive, 4000 rpm, full enclosure, Intuitive Programming System, coolant pump, 1 MB program memory, memory lock keyswitch, 15" color LCD monitor and USB port.

University Tag Number: 
146207
Availability: 
Contact Custodian for availability
  • Kyle Radke
Location
Service Center/Pilot Center
Room Number: 
SHOP
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The compact, yet ruggedly constructed W Series Laboratory Scale Hammer Mill offers tremendous flexibility while producing results comparable to high production models. A robust, portable gravity discharge hammer mill, the W Series is scalable and ideal for batch, small production or pilot projects. It is highly versatile and able to reduce a variety of materials to a fine granular or powder consistency. Optional internal, replaceable wear plates may be added for processing more abrasive materials.

University Tag Number: 
191584
Availability: 
Contact Custodian for availability
  • Sreekala Bajwa
Location
Service Center/Pilot Center
Room Number: 
102 Shop
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Vertical Milling Machine, Variable Speed R8, Table Size (In.) 12 x 54, Longitudinal Travel (In.) 33.88, Cross Travel (In.) 15-21/64, Knee Travel (In.) 19-1/4, Ram Travel (In.) 25, Ram Swivel (Deg.) 90, R-8 Spindle Taper, Spindle to Table (In.) 23, Spindle Speed (RPM) 80 to 3800, Quill Travel (In.) 5, Quill Dia. (In.) 3-3/8, Number of T-Slots 3, T-Slot Size (In.) 3-5/8 In., Feed Rate for Power Down Feed (In.) 0.0015, 0.003, 0.006, Head Angle Front/Back (Deg.) 45, Head Angle (Deg.) 90

University Tag Number: 
196192
Availability: 
Contact Custodian for availability
  • James Moos
Location
Ag & Biosystems Engr
Room Number: 
124
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The Lab Mill 3100 is a hammer type cyclone mill, built into a soundproof casing. An airflow feeder regulates feeding of a sample into a metallic grinding chamber. A hardened steel hammer rotates at high speed, forcing the sample through a stainless-steel sieve. The fine, homogeneous sample is separated from the air in a cyclone and collected in a quick release stainless steel container. The cyclone principle makes the mill self-cleaning and thus cleaning between samples is not normally required. Standard sieve (0.8mm) is used for Falling Number, Glutomatic/Gluten Index and NIR-analyses.

University Tag Number: 
164874
Availability: 
Contact Custodian for availability
  • Natsuki Fujiwara
Location
Northern Crops Institute
Room Number: 
242
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

Type MLU-202 Laboratory Roller Mill, Buhler Inc., Minneapolis, MN

University Tag Number: 
177088
Availability: 
Contact Custodian for availability
  • Senay Simsek
Location
Harris Hall
Room Number: 
25
Inventory Classification
  • Infrastructure
  • Workshop
  • Milling

The Thomas Model 4 Wiley® Mill is ideal for the sample preparation of solid biofuels.

•Official Methods of Analysis AOAC 922

•Moving parts are totally enclosed

•7 3/4” diameter milling chamber - 141 cu. in.

•2 1/4” diameter sample input

•50 to 1,000 gram sample volume

•Single speed - 800 rpm at 60 Hz or 667 rpm at 50 Hz

•All steel construction

University Tag Number: 
179066
Availability: 
Contact Custodian for availability
  • Michael Undi
Location
Central Grasslands Rs/Ext Center