Capture images that are crisp and rich in contrast, have excellent color fidelity and simply contain more information. SteREO Discovery.V12 enhances resolution and contrast in biology and quality assurance.
Highlights:
•Motorized 12:1 zoom
•Seamless integration into the modular system of SteREO microscopes
•Motorized components for reliable results
•Illumination and contrast methods based on cold light or LED
•Excellent depth perception even at high magnification levels
Compounding Aseptic Isolators are also referred to as CAI. These units are designed to maintain an aseptic compounding environment to insure complete sterility of the product. This aseptic environment is maintained throughout the compounding and material transfer processes.
Single door jacketed sterilizer by Consolidated Stills and Sterilizers.
8. 8 cubic foot, features floor standing design, 20" x 20" x 38" deep chamber (actual working size 19. 5" x 19. 5") with hinged front door and manual locking system, for 60 psi @ 20 to 300 degrees f, stainless steel exterior, control panel with touch sensitive key pad, monochrome screen and printer, 120 volt/1 phase/2 amps/200 watts, chamber pressure-vacuum gauge, jacket pressure gauge.
1. Delayed Start timer: may be set to start of the autoclave up to 99 hours later. This allows users to preset cycles the night before to complete as work begins in the morning
2. Liquid Sterilizing Course: Exhaust valve is disabled for this course to prevent the unintentional boiling of liquids at the end of the course.
3. Sterilizing Course: Autoclave will automatically exhaust the steam at the end of the sterilization cycle at the pre-set rate.
The AMSCO 400 Series® Medium Steam Sterilizer is designed for performance in today's sterile processing environment and is AAMI ST-8:2008 compliant. It's built to process 47% more instruments by weight. The AMSCO 400 Series Medium Sterilizer is validated to safely sterilize heat and moisture stable materials in packs up to 25 lb. This allows you to efficiently handle high-volume sterilization and heavier trays, while meeting today's stricter compliance guidelines.
The Type-36 is one of the smallest and fastest core alignment fusion splicers available today. It s a portable, fully automatic, self-contained instrument for creating low-loss optical fiber splices in both field and factory environments. Sumitomo s innovative dual microscope fiber observation system eliminates the need for mirrors, providing faster operation and reduced damage potential. It is designed to work with a variety of fiber types including single-mode, multimode, dispersion shifted, and other specialty fiber.
The M2000 PLUS is a mobile anesthesia machine. Its compact design (now just 18" square) and center balance means complete operating room stability. The larger heavy-duty shelf can handle multiple monitors, ventilators or other equipment configurations with ease.
• Proven unidirectional valve design
• Large 22 1/2" wide X 13" deep monitor shelf
• Quick disconnect common outlet for non-rebreathing systems
• 0-4 Lpm O2 flow meter with mechanical stop flow control
• Oxygen flush with safety restrictor to 30 lpm flow
200mm spin coater with GYRSET system for better uniformity and lower resin consumption, stainless base cabinet, multiple dispense capability for up to 2 photoresist, 1 nitrogen, and 1 solvent line. Maximum 5000 rpm/sec acceleration, motorized dispense arm, Cybor 5026 pump (05026-60-57-52C6-OP-C6-OK) with 512 power supply, and controller.
The Beckman SW 41 Ti is a Titanium six-place swing bucket rotor for use in Beckman Class C, D, F, G, H, R, and S preparative ultracentrifuges. It has a maximum speed of 41,000 rpm with a RCF of 288,000 x g ( at rmax).
Swagelok’s orbital welding system has a unique modular fixturing providing the versatility to weld numerous tubing and component combinations required for system fabrication. Using reliable gas tungsten arc welds and featuring a light-weight portable power supply, the Swagelok orbital welding system is capable of providing consistent, precise welds for tubing diameters from 1/16 to 4 in, (3 mm to 104 mm).