The Trimble® Tablet for Construction is a rugged, versatile and fully connected handheld computer for heavy and highway and marine construction professionals. By incorporating a cellular modem, laptop, GPS and controller, Trimble has drastically advanced in-field computing and eliminated the gap between office design and field implementation.
ICP Inductively Coupled Plasma Etch System. For applications requiring a downstream, high density plasma source. Allows for higher plasma densities at lower pressures. Tight anisotropy in high aspect ratio structures and reduces microloading effect. Four MFC gas inputs mounted in separate cabinet. System has turbo pump and roughing pump. Two RFX-600 13.56 MHz RF generators. 200mm substrate chuck.
A triple-quadrupole mass spectrometer, also known as QqQ, is a tandem MS method in which the first and third quadrupoles act as mass filters and the second causes fragmentation of the analyte through interaction with a collision gas—it is a radiofrequency-only quadrupole, and can be used in either SIM or scan mode. The method can be used to obtain structural information or for quantitation. For structural mass spec, a common sequence is product ion scan, precursor ion scan, and neutral loss scan, followed by selected reaction monitoring (SRM) or multiple reaction monitoring (MRM).
TSA-II – NeuroSensory Analyzer is a precise, computer-controlled device capable of generating and documenting response to highly repeatable thermal and vibratory stimuli, such as warmth, cold, heat-induced pain, cold-induced pain or vibration.
Annealing and densification furnace. Capable of wafer sizes up to 150mm. Temperature range of 200 - 850 °C. Gases used: N2H2, N2, Ar, O2. System can also be setup for 1200 °C with 100 mm wafers.
The FM6X Turbine Service unit is required to operate the FM60, FM61 and FM62 turbine demonstrations. The unit includes a compact three-phase pump, controlled directly from a PC via the IFD7 interface unit (an essential accessory).
The autoclave operates with saturated steam as the sterilizing agent with a temperature range of 105 °C (221°F) to 138 °C (280 °F) and a working pressure that meets AMSE and PED requirements. Each autoclave model is available with either single or double door.
The Thermal Twin process offers new opportunities in extruded foods. For example, products that are high in corn or rice content can be processed without the stickiness previously encountered in other extruder designs. Starches may be fully cooked without damage to functional and organoleptic properties.
In pet food applications, the ability to use high levels of thermal energy also provides the potential to produce specialty foods and treats with up to 90 percent fresh meat (as a percent of the dry recipe) and up to 40 percent moisture without changing the extruder configuration.