AA3 HR AutoAnalyzer uses continuous segmented flow analysis principles to provide significant advantages for environmental applications. With reaction times, up to 20 minutes, even complex procedures like distillation can be automated. Dialyzers can be built into the system for elimination of interference from dirty or colored samples. The proprietary in-line UV digestion procedure conforms to the ISO Standard Methods for automated measurement of Total Cyanide and Total Phosphorus.
The Allegra® X-14R spins up-to three liters at 4,300 x g and processes up-to 148 tubes per cycle — ideal for high-throughput labs.
•Powerful built-in refrigeration system cools faster and maintains temperature even at maximum speed
•ARIES™ Smart Balance Rotor system auto-detects and corrects up-to 50 grams of imbalance to reduce mid-run interruptions, save time and extend system performance
•All rotors, covers and canisters are BioCertified* to contain potentially harmful aerosols and maintain lab safety
Atomic absorption spectroscopy (AAS) is a spectroanalytical procedure for the quantitative determination of chemical elements using the absorption of optical radiation (light) by free atoms in the gaseous state.
In analytical chemistry the technique is used for determining the concentration of a particular element (the analyte) in a sample to be analyzed. AAS can be used to determine over 70 different elements in solution or directly in solid samples used in pharmacology, biophysics and toxicology research.
The EM38-MK2 provides measurement of both the quad-phase (conductivity) and in-phase (magnetic susceptibility) components within two distinct depth ranges, all simultaneously, without any requirement for soil-to-instrument contact. With a maximum effective depth of exploration of 1.5 m, applications in agriculture, archaeology and general soil sciences are common.
-Frequently used for research applications such as lighting for vascular plants to facilitate standard plant production, plant pathology research and seedling germination and development
Lighting System
-Intensity programmable up to 900 micromoles/m2/sec of light irradiance measured at 6” from lamps on 4 on/off light events.
Airflow/Circulation
-Uniform air circulation moves across each shelf through air diffusers on the rear wall.
The KD2 Pro is a fully portable field and lab thermal properties analyzer. It uses the transient line heat source method to measure thermal conductivity, thermal resistivity, thermal diffusivity, and specific heat. Sophisticated data analysis is based on 30+ years of research experience on heat and mass transfer in soils and other porous materials.
Kubota RTVs have been the best-selling diesel utility vehicles in North America since 2004. Each year, they set the standard for ruggedness and reliability, proving themselves ready to work day after day under all kinds of conditions. Meet the Kubota RTV X-Series, rough-and-ready RTV that raises the bar on comfort, convenience, and performance.
You should be getting 98% or better accuracy from your meters, but typical meters run at only 92%-97%. When each additional percentage point is worth another bushel or two for every acre, there’s plenty of room for improvement.
The PikoReal Real-Time PCR System is a gene quantification and genotyping platform in 24- and 96-well block formats. Using PikoReal Software, the system is applicable to absolute quantification, relative quantification, melt curve analysis, high resolution melt analysis, and allelic discrimination. The PikoReal Real- Time PCR System is designed to a minimal footprint, making the system ideal for personal bench top use and field applications, for example.