This covers equipment which produces a sample or specimen through physical or mechanical means or through chemical routes, but excluding biochemical and biomolecular processes.
The PLS6.75 is a free-standing platform with a material processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³). The single laser platform supports a power range of 10 to 75 watts with one 10.6µ CO2 laser source or one 9.3µ CO2 30 watt or 50 watt laser source.
•Entry Level Rapid Testing System provides combined Environment Accelerated Testing
•Rapid Thermal changes from +200°C to -100°C
•Heating up to 35°C per minute (avg.)
•Cooling up to 40°C per minute (avg.)
•LN2 cooled
•Six Degree of Freedom random, Omni Axial™ Vibration
•Vibration range 5-40 gRMS, 50 lb maximum load
•Vibration table top 16" x 12"
•Portable for easy movement between departments
•Easy to use with preset programs & remote monitoring
•xLF2 Vibration Table with PSD Management
•Multi-pane Viewing Window
Lachat’s QuikChem® 8500 Series 2 Flow Injection Analysis System features high sample throughput and simple but rapid method changeover. The QuikChem Flow Injection Analysis system maximizes productivity in determining ionic species in a variety of sample types, from sub-ppb to percent concentrations. With over 500 methods for environmental, agronomic and industrial applications, including USEPA accepted and equivalent methods, the QuikChem 8500 will satisfy all your analytical requirements.
The Heidolph rotary evaporator of the Hei-VAP series are forming the ideal basis for intelligent evaporation on your laboratory. They are suitable for standard distillation, for complex distilling processes as well as for automatic distillation.
Aspects such as safety, convenience and cost savings have been considerably taken into account during the development of the evaporators.
Buehler’s SimpliMet 1000 automatic mounting press is used to mount specimens with thermosetting resins, including Phenolics, EpoMet, ProbeMet, KonductoMet I, and Diallyl Phthalate. Easy to change molds are offered in a full range of sample sizes from 1 to 2 (25 mm–50 mm).
The WS-400 is a single wafer, manual dispense spin processor with a nitrogen purged process chamber and is manipulated by a digital controller. The wafer is held in place during process by means of a vacuum chuck. The digital controller has twenty programs each with fifty-one steps stored in non-volatile memory. The program sizes and steps can be changed.
Used to develop photo resist on wafers and substrates up to 230 mm. Adjustable speed from 50 to 8,000 rpm with ±10 rpm resolution. Dual N2 aspirated atomizing nozzles. Constant 2-3 psi nozzle pressure regardless of fluid level.
A GeneVac EZ-2TM solvent evaporation system evaporates solvent and other low molecular weight compounds from arrays of samples. It is used for sample work-up and to evaporate volatiles from polymer and coating samples for solids determination.
The FT29 is a batch process unit suitable for teaching and research. Capable of a variety of solid/liquid extractions, it is particularly suitable for leaching edible oils from seeds and desolventising extracted solids and miscella.
The Brewer Science CEE 100CB Spin Coater is capable of storing up to 10 spin regimes which may include spin speed ramp rate, stepped spin speeds, and a nitrogen float or vacuum hot plate contact mode for photoresist curing.
